Masimo Radical Signal Extraction Návod k obsluze Strana 43

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 78
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 42
Radical Signal Extraction Pulse Oximeter Operator’s Manual 33
4
operation
general
AVERAGING TIME The signal averaging time of this device can be set to: 2, 4,
8, 10, 12, 14 and 16 seconds*.
*With FastSat the averaging time is dependent on the input signal. For the
2 and 4 second settings the averaging times may range from 2-4 and 4-6
seconds, respectively.
FASTSAT Select Ye s to activate the FastSat algorithm. In the 2 and
4 seconds averaging mode, the FastSat algorithm is
automatically enabled.
HOME USE Set the Radical to the Home Mode.The Radical will remain
in the Home Mode until the No setting is selected. A
password is required to activate or deactive this mode. See
Section 4, Home Use Operation, for a detailed description.
INTERFACE ALARMS During SatShare, HP Vuelink and Spacelabs Flexport
operation, the audible alarms can be enabled or disabled.
SATSHARE NUMBERS During SatShare operation the saturation and pulse rate
measurements can be displayed on the Radical by
selecting a SatShare Numbers setting of Ye s .
POWER SAVE Select Ye s to maximize battery-operating time of the
Radical while powered by the Handheld battery or optional
Docking Station battery. Selecting Ye s will disable
Docking Station functions such as SatShare, Serial and
Analog output. Selecting No will activate these Docking
Station functions while operating on battery power. (While
operating in the Power Save mode, a power cycle of the
Radical may be required to activate the Docking Station
again after it has been disabled.)
MENU ITEMS DESCRIPTION
TIME Set the time - hour and minutes - in 12 or 24 hour format.
TIME FORMAT Set the format of the time display as it will be shown on the front
panel. Available options are 12 hour (default) and 24 hour display.
DATE Set the date (day, month and year).
DATE FORMAT Set the format of the date display as it will be shown on the front
panel. Available options are mm/dd/yyyy (default) and
dd/mm/yyyy.
clock
MENU ITEMS DESCRIPTION
Zobrazit stránku 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 77 78

Komentáře k této Příručce

Žádné komentáře